PDA

View Full Version : little help


Glist3rin
02-27-2006, 02:16 AM
well im trying to wheelie, im on an r6... im in 3rd at 6grand, i preload... im coming up really shakey on the front end... my wheel instantly goes to the side im trying to get it to come out smooth...

am i supposed to pull up or just push down and let the bike come up by itself?

also, im doing it in 3rd because i let my friend who stunts ride my bike pull a wheelie in 2nd and 3rd and he told me 3rd was alot smoother/safer.


edit: im not sure if i pull up or not, because when i would wheelie a dirtbike i would pull up, and it worked for me... although i dont really know if the pullup is doing anything for a bigass bike lol... should i just lean backwards and let the bike pullup byitself after pushing down?

Chiny
02-27-2006, 09:48 AM
Where's Moto?

02-27-2006, 09:50 AM
his wheelies are GARBAGE!

:laughing3:

Chiny
02-27-2006, 09:53 AM
:funny0jl:

HamG
02-27-2006, 09:54 AM
:popcorn

ALF
02-27-2006, 09:55 AM
hotdog

RexManWolf
02-27-2006, 10:32 AM
I know on my bike, for me to get it up i pushed up on it! It made it easier to come up, but also i do them full throttle, I don't clutch it. I think on yours you have to clutch it..

svrgn
02-27-2006, 10:36 AM
how long u been riding... u may want to learn how to really maneuver your bike before doing that kinda stuff... in any case watchj it when the wheel comes up that you dont pull the throttle bar and go down on a twisted angle...

try pulling them in first... throttle more twitchy but better to learn and less speed to fall on your ass at...

Papo600RR
02-27-2006, 10:36 AM
in 3rd gear, i think u have to clutch it.

disgofast
02-27-2006, 11:27 AM
I actually find that clutching it up, gives me the most predictable wheelies than any other method. Why? Its much easier to do exactly the same thing over, and over. Basically get rolling in 2nd gear to an RPM of about 1/3 to 1/2 of your maximum hp. This is what worked well on my Daytona, with stock gearing. I would go to about 5000 rpm in 2nd gear. Pull in the clutch, rev the engine a time or two, to time it so that the throttle would be wide open and the clutch releasing as the tach swept 9-10k.
:shock:

HamG
02-27-2006, 11:47 AM
:popcorn

02-27-2006, 11:48 AM
I actually find that clutching it up, gives me the most predictable wheelies than any other method. Why? Its much easier to do exactly the same thing over, and over. Basically get rolling in 2nd gear to an RPM of about 1/3 to 1/2 of your maximum hp. This is what worked well on my Daytona, with stock gearing. I would go to about 5000 rpm in 2nd gear. Pull in the clutch, rev the engine a time or two, to time it so that the throttle would be wide open and the clutch releasing as the tach swept 9-10k.
:shock:

I hope this is for real....

disgofast
02-27-2006, 11:50 AM
I actually find that clutching it up, gives me the most predictable wheelies than any other method. Why? Its much easier to do exactly the same thing over, and over. Basically get rolling in 2nd gear to an RPM of about 1/3 to 1/2 of your maximum hp. This is what worked well on my Daytona, with stock gearing. I would go to about 5000 rpm in 2nd gear. Pull in the clutch, rev the engine a time or two, to time it so that the throttle would be wide open and the clutch releasing as the tach swept 9-10k.
:shock:

I hope this is for real....yes it is :mrgreen:

02-27-2006, 11:51 AM
If not and they try it... no telling what can happen.

disgofast
02-27-2006, 11:52 AM
Moto a little help here

disgofast
02-27-2006, 11:55 AM
start out conservatively on your clutch release point, and gradually increase the RPM's each time you try it, until the wheel comes up so high you have to roll off the throttle a tad. You may want to cover your rear brake while you are learning this as well, in case you go too high. Standing up fast, will also help put the front end back down if you over do it. Remember these things!
:rr: :rr: :rr: :rr: :rr:

02-27-2006, 11:56 AM
Moto a little help here

What do you need Moto's help for? I would like to see this here wheelie you say you perform.

disgofast
02-27-2006, 11:59 AM
Gummo has seen them :salute:

HamG
02-27-2006, 12:01 PM
:popcorn

gummo
02-27-2006, 12:38 PM
I saw one of his stand up's for over a mile.

ALF
02-27-2006, 01:08 PM
Disgo was doing some mad wheelies last sunday when we rode to the Hard Rock...I was impressed...

disgofast
02-27-2006, 02:47 PM
Disgo was doing some mad wheelies last sunday when we rode to the Hard Rock...I was impressed... It was the beer :wink:

gummo
02-27-2006, 02:49 PM
I prefer weed for my wheelies. They seem to float that much nicer. :mrgreen:

motopsyko32
02-27-2006, 03:01 PM
I actually find that clutching it up, gives me the most predictable wheelies than any other method. Why? Its much easier to do exactly the same thing over, and over. Basically get rolling in 2nd gear to an RPM of about 1/3 to 1/2 of your maximum hp. This is what worked well on my Daytona, with stock gearing. I would go to about 5000 rpm in 2nd gear. Pull in the clutch, rev the engine a time or two, to time it so that the throttle would be wide open and the clutch releasing as the tach swept 9-10k.
:shock:

+1

In an R6 Try it in Second. more torque than third. To wheelie an R6 in third using the preload method or the throttle chop method its damn near impossible. Can be done but not consistently or every time.

On second get rolling at about 6.5-7k rpm Slip the clutch and keep in the gas so that the rpms go up to around 10K and then release the clutch....

BABY STEPS at first... as you get more comfy bring the wheel higher. if you want to use the preload/Chop/Bounce method, you dont have to push you accelerate HARD until about 6K rpm and then lett off the throttle abruptlt so that the bike dives and the forks compress. time the forks releasing and then gass and pull.. Doesnt have to be a HARD pull just a manly tug... again BABY STEPS or you will loop it...

Katana-750_Lady
02-27-2006, 03:05 PM
well im trying to wheelie, im on an r6...

There's your problem .. it's a yamacrap :)


Just Kidding!! But seriously , get a Honda ;)

motopsyko32
02-27-2006, 03:06 PM
R6 is one of the preferred stuntbikes....

Katana-750_Lady
02-27-2006, 03:09 PM
LOL .. I know nothing about stunting :) Nor do I really want to, hence I was joking.

I just don't like Yamaha motorcycles, it's personal preference. ;)

I have only gotten my wheel up once, and I nearly shit myself. No thank you LOL

02-27-2006, 03:10 PM
Moto has had a 600RR and now has a 929.... he also had the R1...

motopsyko32
02-27-2006, 03:15 PM
and the 900RR .. lol I agree Hondas are the premier stunt bikes but the R6 is a close third . Second I would say is the Zx6rr Kawi

disgofast
02-27-2006, 03:17 PM
Triumph is a very good stunt bike :mrgreen:

02-27-2006, 03:18 PM
and the 900RR .. lol I agree Hondas are the premier stunt bikes but the R6 is a close third . Second I would say is the Zx6rr Kawi

I stand corrected....

motopsyko32
02-27-2006, 03:19 PM
and the 900RR .. lol I agree Hondas are the premier stunt bikes but the R6 is a close third . Second I would say is the Zx6rr Kawi

I stand corrected....not corrected, just reminded :lol Actually you were correct ... you didnt state anything incorret

02-27-2006, 03:25 PM
and the 900RR .. lol I agree Hondas are the premier stunt bikes but the R6 is a close third . Second I would say is the Zx6rr Kawi

I stand corrected....not corrected, just reminded :lol Actually you were correct ... you didnt state anything incorret

:newbanana

Glist3rin
02-27-2006, 09:56 PM
i tried it in 1st today lol... what a fun ride haha, road it for a good long while it was hard to come back down smoothly .... im going out to the boca car meet now so im going to take some backroads and try 2nd out.

disgofast
02-27-2006, 10:37 PM
i tried it in 1st today lol... what a fun ride haha, road it for a good long while it was hard to come back down smoothly .... im going out to the boca car meet now so im going to take some backroads and try 2nd out. GO EASY :shock:

Glist3rin
02-28-2006, 01:51 AM
im all about easy mang. people make this shit look harder then it really is :P its pretty easy.

for my next trick, a stoppie U turn, landing my back tire on a baracade? :)

edit: it was to slippery out... the only wheelie i could get up was in 1st... 2nd would just spin out... pissing me off lol... SO WET COME COME AGAIN SUN..

motopsyko32
02-28-2006, 04:00 PM
Stupid - Guy wipes out trying to wheelie a dirt bike - ouch! Motorcycle Crash

Papo600RR
02-28-2006, 04:05 PM
ouch!

CHONCH
02-28-2006, 04:09 PM
dude on the dirtbike proved any Idiot can wheelie fast, slow now thats the tricky part....Disgo has that down.

Papo600RR
02-28-2006, 04:11 PM
how do you do a slow wheelie

Chin
02-28-2006, 04:27 PM
whoa that looked like me... DAMN

disgofast
02-28-2006, 04:32 PM
how do you do a slow wheelieyou go slow :wink:

HamG
02-28-2006, 04:57 PM
:laughing3:

Papo600RR
02-28-2006, 04:57 PM
how do you do a slow wheelieyou go slow :wink:

no shit sherlock holmes

disgofast
02-28-2006, 04:58 PM
how do you do a slow wheelieyou go slow :wink:

no shit sherlock holmesYou asked and I told :wink:

motopsyko32
02-28-2006, 05:57 PM
how do you do a slow wheelieyou controil the wheelie with the rear brake. You bring the bike past the balance point where it feels like you ar going to loop and then regulate the wheelie and the speed with the rear brake

Geeman
02-28-2006, 06:15 PM
what makes hondas the premier stunt bike. ?

is it balance the ease to stunt.?
are they built like tanks are kawasaki's in the pantheon of stunt bikes.

curious being the stunt challenged and all.? .

motopsyko32
02-28-2006, 06:45 PM
Honda engines are known to withstand a beating better than the other 3 major sportbikes. Their transmissions withhold abuse better as well. their parts are cheaper and easier to find and their balance points are lower than most other bikes. Kawasaki Zx6rr have been coming on strong as of late

disgofast
02-28-2006, 10:37 PM
Triumph's are good :mrgreen:

motopsyko32
02-28-2006, 10:43 PM
sure are ask Kyle Woods

WhosR1
03-03-2006, 12:59 PM
well im trying to wheelie, im on an r6...

There's your problem .. it's a yamacrap :)


Just Kidding!! But seriously , get a Honda ;)



:diabloanifire: I happen to like yamaha. Use to have an honda cbr 2001 but prefer my 03 R1

motopsyko32
03-03-2006, 01:12 PM
well im trying to wheelie, im on an r6...

There's your problem .. it's a yamacrap :)


Just Kidding!! But seriously , get a Honda ;)



:diabloanifire: I happen to like yamaha. Use to have an honda cbr 2001 but prefer my 03 R1R1's are bad ass bikes and look NICESt of all IMO but the balance point is high and the wobble like crazy on highway wheelies...

WhosR1
03-03-2006, 02:49 PM
well im trying to wheelie, im on an r6...

There's your problem .. it's a yamacrap :)


Just Kidding!! But seriously , get a Honda ;)



:diabloanifire: I happen to like yamaha. Use to have an honda cbr 2001 but prefer my 03 R1R1's are bad ass bikes and look NICESt of all IMO but the balance point is high and the wobble like crazy on highway wheelies...

they do wobble. Got the scar to prove it lol