SoFlaSportbikes.com - South Florida's Sportbike Community SoFlaSportbikes.com - South Florida's Sportbike Community

Go Back   SoFlaSportbikes.com - South Florida's Sportbike Community

Notices

View Single Post
Old 08-12-2015, 03:10 PM   #4
Foxrider64
Amateur Racer
 
Foxrider64's Avatar
 
Join Date: Oct 2013
Location: Ft Myers
Posts: 143
Foxrider64 is on a distinguished road
Re: Oil weight/viscocity/index brand

Quote:
Originally Posted by Qomomoko View Post
great write up from Scudman.

there are about 5 threads related to fork oil

I am playing with my suspension and such and so learning about suspension fluid.

for my particular case:
Pregen ninja 250 with newgen ninja 250 suspension modded.
.75 kg/mm springs
recommended weight is 15wt from racetech ( I 'll call em again and see if they tell me their oil's viscosity and properties)

though our forks do not get got, I read it is recommended to get fluid with a index (which indicates its resistance to change it properties at higher working temperatures) of greater than 150.

also probably ordering a fork rebuild kit, not sure yet..

Wondering how you bike gurus can share some light on for oil info..

Race tech says they use Spectro Oil and Bel-ray oil is the closest in properties to it.

@Qomomoko- I run 15wt oil with .7 springs from Racetech in my newgen 250. I also cut new preload spacers to increase the preload. I did not do emulators or upgraded preload adjuster caps. Trying to keep costs down.

It has been working well for me.
Foxrider64 is offline   Reply With Quote
 
Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 12:36 PM.


Powered by vBulletin® Version 3.8.9 Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2005-2012, SoFlaSportbikes.com. All Rights Reserved