- South Florida's Sportbike Community - South Florida's Sportbike Community

Go Back - South Florida's Sportbike Community


View Single Post
Old 07-26-2011, 05:34 PM   #11
NCRyder's Avatar
Join Date: Jul 2011
Location: North Carolina
Posts: 1
NCRyder is on a distinguished road
Re: Suzuki GSXR SET - VALVE Removal

Ive removed the exhaust & made sure the valve was open.
Removed the SET Valve & wires.
Problem: i unplugged the wire from Pin 29 instead of Pin 30.
Wires are almost the same colors so i didnt notice that night.
Bike wouldnt start, after i realized i had disconnected the wrong wire,
i connected it back & disconnected the wire from Pin 30.
Bike still wouldnt start!
Ive tried disconnecting the battery cables & reconnected them..
Bike still wont start!
At this point im really stressed & very lost on what i should try next.
I used this video from youtube & did everything in the right order
(2007 Suzuki GSXR 600 "SET" Valve Removal Video Tutorial)
NCRyder is offline   Reply With Quote
Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 08:23 PM.

Powered by vBulletin® Version 3.8.9 Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2005-2012, All Rights Reserved