SoFlaSportbikes.com - South Florida's Sportbike Community SoFlaSportbikes.com - South Florida's Sportbike Community

Go Back   SoFlaSportbikes.com - South Florida's Sportbike Community > Motorcycle Discussion > Sportbike Resource Center

Notices

Forum Sponsor

Reply
 
Thread Tools
Old 07-26-2011, 05:34 PM   #11
NCRyder
Newb
 
NCRyder's Avatar
 
Join Date: Jul 2011
Location: North Carolina
Posts: 1
NCRyder is on a distinguished road
Re: Suzuki GSXR SET - VALVE Removal

Ive removed the exhaust & made sure the valve was open.
Removed the SET Valve & wires.
Problem: i unplugged the wire from Pin 29 instead of Pin 30.
Wires are almost the same colors so i didnt notice that night.
Bike wouldnt start, after i realized i had disconnected the wrong wire,
i connected it back & disconnected the wire from Pin 30.
Bike still wouldnt start!
Ive tried disconnecting the battery cables & reconnected them..
Bike still wont start!
At this point im really stressed & very lost on what i should try next.
I used this video from youtube & did everything in the right order
(2007 Suzuki GSXR 600 "SET" Valve Removal Video Tutorial)
NCRyder is offline   Reply With Quote
Reply

Bookmarks

Thread Tools

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -4. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.9 Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2005-2012, SoFlaSportbikes.com. All Rights Reserved