| |
| |||||||
| Notices |
 |
| | Thread Tools |
02-18-2008, 08:56 AM
| #1 |
| ScrewFace Racing #521  Join Date: Aug 2005 Location: From Phoenix, Live in Oaklnad Park, FL
Posts: 5,568
    | Suzuki GSXR FI Fault Code List / Dealer Mode Switch C14 - THROTTLE POSITION SENSOR C15 - ENGINE COOLANT TEMPERATURE SENSOR C21 - INTAKE AIR TEMPERATURE SENSOR C22 - ATMOSPHERIC PRESSURE SENSOR C23 - TIPOVER SENSOR C24 - IGNITION SIGNAL #1 C25 - IGNITION SIGNAL #2 C26 - IGNITION SIGNAL #3 C27 - IGNITION SIGNAL #4 C28 - SECONDARY THROTTLE VALVE ACTUATOR C29 - SECONDARY THROTTLE POSITION SENSOR C30 - SECONDARY THROTTLE CONTROL UNIT C31 - GEAR POSITION SENSOR C32 - INJECTOR SIGNAL #1 C33 - INJECTOR SIGNAL #2 C34 - INJECTOR SIGNAL #3 C35 - INJECTOR SIGNAL #4 C41 - FUEL PUMP CONTROL SYSTEM C42 - IGNITION SWITCH SIGNAL C46 - EXHAUST CONTROL VALVE ACTUATOR (01-02 1000 and 06-07 600/750/1000 ONLY) Location of dealer mode switch and how to get the codes. The dealer mode connector is under the tail cowling on the left side of the bike, near the regulator/rectifier. It will have only two wires going to it. It is is small white connector that does not plug into anything, and has a rubber cap on one end. BLACK W/ GREEN BAND Wire with a WHITE STRIPE and a WHITE W/ GREEN BAND Wire with a RED STRIPE you just use a paper clip to jump the two wires together in the connector. this is for models with 16 bit ECM's
__________________ "Political Correctness is killing this country." |
|      |
|
02-18-2008, 11:21 AM
| #2 |
| SHAGERON!!  Join Date: Feb 2007 Location: weston,fl
Posts: 6,378
| Re: test  
__________________     - Joel |
| |
